Nickel Alloy

Nickel is a chemical element with the symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel belongs to the transition metals and is hard and ductile. Pure nickel, powdered to maximize the reactive surface area, shows a significant chemical activity, but larger pieces are slow to react with air under standard conditions because an oxide layer forms on the surface and prevents further corrosion (passivation). Even so, pure native nickel is found in Earth’s crust only in tiny amounts, usually in ultramafic rocks, and in the interiors of larger nickel–iron meteorites that were not exposed to oxygen when outside Earth’s atmosphere.

Nickel is one of four elements (the others are iron, cobalt, and gadolinium) that are ferromagnetic at approximately room temperature. Alnico permanent magnets based partly on nickel are of intermediate strength between iron-based permanent magnets and rare-earth magnets. The metal is valuable in modern times chiefly in alloys; about 68% of world production is used in stainless steel.
Nickel is a silvery-white metal with a slight golden tinge that takes a high polish. It is one of only four elements that are magnetic at or near room temperature, the others being iron, cobalt and gadolinium. Its Curie temperature is 355 °C (671 °F), meaning that bulk nickel is non-magnetic above this temperature.

ROUND BAR

Flanges

Sheets

FASTNER

Specification :-

  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B162 / ASME SB162 , AMS 5553
  • Dimension : ASTM, ASME, and API
  • Nickel Alloy Sheet : thickness range from .008″ to .0125″
  • Size : 15NB to 150NB In
  • Tempers : Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard
  • Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
  • Form : Plain Sheet, Shim Sheet, Perforated Sheet
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B564 / ASME SB564
  • Dimension : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
  • Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
  • Size : 1/2″ (15 NB) to 48″ (1200NB)
  • Class/ Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
  • Flange Face Types : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
  • Form : Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Plate flange, ASME B16.5 flange
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B160 / ASTM SB160
  • Size Range : 3.17 mm to 350 mm diameter
  • Length(mm) : 100 mm To 3000 mm Long & Above
  • Thickness : 2mm~100mm
  • Types : Monel Flat Bars, Monel Alloy Flat Bars
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B366 / ASME SB366
  • Dimension : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
  • Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
  • Types : Seamless / Welded / Fabricated
  • Schedule : Sch 5 TO Sch XXS.
  • Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
  • Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B161, B775 / ASME SB161, SB775
  • Pipe Size : Range 15″NB – 150″NB
  • Outside Diameter : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness.
  • Length : Single Random, Double Random & Required Length
  • Thickness : 0.3mm – 50 mm
  • Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS
  • Types : Seamless, Welded, ERW
  • End : Plain End, Beveled End, Treaded
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B160 / ASME SB160
  • Size Range : 40mm*20mm~300mm*300mm
  • Thickness : 3.0mm – 120mm
  • Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
  • Types : Structural Steel U, C, Miscellaneous Channels, Hot Rolled Channel
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B160 / ASME SB160
  • Size Range : (Ro)Dia 4 – 600mm, (Hex) 6-75mm, (SQ) 4 -100mm
  • Thickness : 5 mm To 500 mm thick in 100 mm TO 6000 mm.
  • Types : Round, Square, Recatangle, Hexagonal, Round Threaded
  • Grades : Nickel Alloy 200, 201
  • Standard : ASTM B160 / ASME SB160
  • Size Range : 3″ thru 12.31″
  • Thickness : 3.0mm – 120mm
  • Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
  • Types : T Beams, Hot Rolled T Beams
  • ASTM / ASME : ASTM B160 / ASME SB160
  • Dimension : DIN, ISO, ASTM, JIS, BS, GB, IS and all International Standards
  • Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
  • Length : 3 mm to 200 mm
  • Threads Configuration : BSW, UNC, BSF, UNF METRIC, or as required
  • Types : Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.
error: Content is protected !!