QUICK LINK
CONTACT US
Bokadia Steels
- Survey N0 391, Plot No 127/1/A, Near Kewal Kanta, Ajod Dairy Road, Rakhial, Ahmedabad - 380023
- +91-90990 16431
- +91-79 - 22749935
- info@bokadiasteels.com
Menu
Incoloy
Incoloy products are mostly chromium-based and mostly nickel-based, and designed for corrosion resistance as well as strength at high temperatures.
Incoloy alloys belong to the category of super austenitic stainless steels. One advantage is that Incoloy alloys do not have to be heat treated after welding to restore the corrosion resistance.
There are specific alloys for resistance to particular chemical attacks. For example, alloy 020 is designed to be resistant to sulphuric acid, and the DS Incoloy is to be used in heat-treating furnaces with reactive atmospheres and many heat cycles.
Incoloy 908 “has high tensile strength, fatigue crack growth resistance, good weldability, metallurgical stability and ductility, high fracture and impact toughness, [and] low coefficient of thermal expansion… [Its] resistance to oxygen embrittlement… allows hot fabrication without cracking.
Incoloy 908 “has high tensile strength, fatigue crack growth resistance, good weldability, metallurgical stability and ductility, high fracture and impact toughness, [and] low coefficient of thermal expansion… [Its] resistance to oxygen embrittlement… allows hot fabrication without cracking.
Incoloy 907 “has high strength and low thermal expansion coefficient at temperatures up to 800°F.” Incoloy 945X is designed for chlorine-rich environments. Molybdenum adds crevice corrosion and pitting to Incoloy 945.
ROUND BAR
Flanges
Sheets
FASTNER
Specification :-
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B409 / ASME SB409, AMS 5877, ASTM B424 / ASME SB424
- Dimension : ASTM, ASME, and API
- Nickel Sheet : thickness range from .008″ to .0125″
- Nickel Plates : thickness ranges from .0125″ to 5.00″
- Size : 15NB to 150NB In
- Tempers : Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard
- Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
- Form : Plain Sheet, Shim Sheet, Perforated Sheet
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B564 / ASME SB564
- Dimension : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
- Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
- Size : 1/2″ (15 NB) to 48″ (1200NB)
- Class/ Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
- Flange Face Types : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
- Form : Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Plate flange, ASME B16.5 flange
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B408 / ASME SB408
- Size Range : 3.17 mm to 350 mm diameter
- Length(mm) : 100 mm To 3000 mm Long & Above
- Thickness : 2mm~100mm
- Types : Monel Flat Bars, Monel Alloy Flat Bars
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B366 / ASME SB366
- Dimension : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
- Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
- Types : Seamless / Welded / Fabricated
- Schedule : Sch 5 TO Sch XXS.
- Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
- Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B705 / SB705, ASTM B407/ ASME SB407, STM B514 / SB514, ASTM B423, ASME SB423
- Pipe Size : Range 15″NB – 150″NB
- Outside Diameter : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness.
- Length : Single Random, Double Random & Required Length
- Thickness : 0.3mm – 50 mm
- Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS
- Types : Seamless, Welded, ERW
- End : Plain End, Beveled End, Treaded
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B408 / ASME SB408
- Size Range : 40mm*20mm~300mm*300mm
- Thickness : 3.0mm – 120mm
- Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
- Types : Structural Steel U, C, Miscellaneous Channels, Hot Rolled Channel
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B408 / ASME SB408
- Size Range : (Ro)Dia 4 – 600mm, (Hex) 6-75mm, (SQ) 4 -100mm
- Thickness : 5 mm To 500 mm thick in 100 mm TO 6000 mm.
- Types : Round, Square, Recatangle, Hexagonal, Round Threaded
- Grades : Incoloy 800/800H/800HT, 825, 925
- Standard : ASTM B408 / ASME SB408
- Size Range : 3″ thru 12.31″
- Thickness : 3.0mm – 120mm
- Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
- Types : T Beams, Hot Rolled T Beams
- ASTM / ASME : ASTM B425 / ASME SB425
- Grades : Alloy 625 Fasteners Alloy 600 Fasteners Alloy 718 Fasteners
- Dimension : DIN 933/912/7991, ISO 4017/4762, ASME B18.3/B18.2.1/B18.2.3.6M/B18.5
- Size : M02 to M160
- Length : 3 mm to 200 mm
- Threads Configuration : BSW, UNC, BSF, UNF METRIC, or as required M3, M14, M2.5, M2, M12, M5, M6, M4, M20, M16, M30, M24, M36, M8, M10 etc.
- Types : Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.
Our Materials
Applications Industries
Previous
Next
worldwide delivery
