Aluminium

Aluminium is a silvery-white metal, the 13 element in the periodic table. One surprising fact about aluminium is that it’s the most widespread metal on Earth, making up more than 8% of the Earth’s core mass. It’s also the third most common chemical element on our planet after oxygen and silicon. The most common form of aluminium found in nature is aluminium sulphates. These are minerals that combine two sulphuric acids: one based on an alkaline metal (lithium, sodium, potassium rubidium or caesium) and one based on a metal from the third group of the periodic table, primarily aluminium.

Aluminium combines characteristics of pre- and post-transition metals. Since it has few available electrons for metallic bonding, like its heavier group 13 congeners, it has the characteristic physical properties of a post-transition metal, with longer-than-expected interatomic distances
Aluminium has a high chemical affinity to oxygen, which renders it suitable for use as a reducing agent in the thermite reaction. A fine powder of aluminium metal reacts explosively on contact with liquid oxygen; under normal conditions, however, aluminium forms a thin oxide layer (~5 nm at room temperature) that protects the metal from further corrosion by oxygen, water, or dilute acid, a process termed passivation.

ROUND BAR

Flanges

Sheets

FASTNER

Specification :-

  • Grades : 1100, 2014, 2017, 2024, 3003, 5052, 5082, 5083, 5086, 5754, 6061, 6063, 6082, 6083, 7050, 7075
  • Specification : ASTM B209 / ASME SB209
  • Temper : O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851
  • Thickness : 0.2~300mm
  • Width : 500~2500mm
  • Length : 500~10000mm
  • Surface : Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
  • Aluminium Sheet / Plate Coating : PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating
  • Types : Hot-Rolled (HR) / Cold-Rolled (CR) Sheet / Plates/ Strips/ Coils/ Chequered Plates.
  • Aluminium Alloy : ASTM / ASME
  • Dimension : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • Size : 1/2″ (15 NB) to 48″ (1200NB)
  • Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
  • DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
  • BS : BS4504 , BS4504, BS1560, BS10
  • Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
  • Form : Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Plate flange, ASME B16.5 flange
  • Grades : 1050, 1060, 1070, 1100, 2014, 2024, 3003, 5052, 5754, 5083, 5086, 6061, 6063, 6082, 7050, 7075
  • Specification : ASTM B 221 ASME SB 221, B211, B565, B316 1100, AMS 4102
  • Standard : ASTM, BS and all International Standards
  • Temper : O, H12, H14, H16, H18, H22, H24, H26, H32, H112
  • Thickness : 0.1-600mm,etc
  • Size : 1-2500mm, etc
  • Types : Aluminium Flat Bars, Aluminium Alloy Flat Bars
  • Grades : 6063, 6061T6/T651, 6082 T6/T651, 5052, 5083, 5086, 7075, 1100, 2014, 2024
  • Aluminium Alloy : ASTM B361, ASME SA361
  • Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
  • Dimension : AASME/ANSI B16.9, ASME B16.28, MSS-SP-43
  • Size : Seamless Elbow ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
  • Types : Seamless / Welded / Fabricated
  • Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
  • Form : Elbow, 45 / 90 / 180 Deg Elbow, Reducing Elbow, Long Radius Elbow, Short Radius Elbow, LR Elbow, SR Elbow
  • Grades : 6061, 6063, 6082, 6083, 7050
  • Aluminium Alloy : ASTM B345, B241, B429 / ASME SB345, SB241, SB429
  • Standard : AMS QQ-A-200/8, AMS QQ-A-200/9, AMS 4160/4161/4172
  • Size : 8 (1-1/2″ / 1.900″)
  • Outer Diameter : 1″ through 16″
  • Form : Round, Square, Rectangular, Custom, Hollow, Extruded Pipe Etc
  • Length : Double Random, Single Random, Cut Length
  • Types : Seamless / ERW / Welded / Fabricated / LSAW Pipes
  • Thickness : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
  • End : Plain End, Beveled End, Threaded
  • Grades : 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100
  • Specification : ASTM B308 / ASME B308
  • Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
  • Aluminium Channles : 40mm*20mm~300mm*300mm
  • Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
  • Types : Structural Steel U, C, Miscellaneous Channels, Hot Rolled Channel
  • Grades : 1050, 1060, 1070, 1100, 2014, 2024, 3003, 5052, 5754, 5083, 5086, 6061, 6063, 6082, 7050, 7075
  • Aluminium Alloy : ASTM B221, B211, B565, B316 1100, AMS 4102
  • Standard : ASTM, ASME, AMS, GB/T, JIS
  • Aluminium Round Bar Temper : O, H12, H14, H16, H18, H22, H24, H26, H32, H112
  • Aluminium Bar Form : Aluminium Round, Hex, Flat, Half Round, Oval, Rectangular in Black & Bright Finish
  • Aluminium Round Bar Diameter : 0.1-600mm,etc
  • Aluminium Hexagonal Bar : 0.1-600mm,etc
  • Aluminium Round Bar Length : 1-12m, Random, Fix & Cut Length or as per clients’ requirement
  • Aluminium Bar : Bright, Polish & Black
  • Types : Round, Square, Recatangle, Hexagonal, Round Threaded
  • Grades : 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100
  • Specification : ASTM B308 / ASME B308
  • Diamension : EN, DIN, JIS, ASTM, BS, ASME, AISI
  • Aluminium Beam : 3″ thru 12.31″
  • Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
  • Types : T Beams, Hot Rolled T Beams
  • Specification : ASTM B 211 ASME SB 211
  • Standard : IS, ASTM, BS and all International Standards
  • Fasteners/ Bolts Size : M30, M10, (M45), M36, (M14), (M18), M8, (M27), M4, M3, M12, M42, M48, M6, M20, M33, M160, M2, (M3.5), M16, M24, M5, (M22) and as per need
  • Form : Square, Hex, Threading as per Gauge, Round Etc.
  • Length : 3 milimeter – 200 milimeter
  • Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
  • Types : Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw, Hex Set Screw, Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw, Nut.

Our Materials

Applications Industries

worldwide delivery

QUICK LINK

CONTACT US

Bokadia Steels

error: Content is protected !!