Titanium

Titanium is widely distributed and constitutes 0.44 percent of Earth’s crust. The metal is found combined in practically all rocks, sand, clay, and other soils. It is also present in plants and animals, natural waters and deep-sea dredgings, and meteorites and stars. The two prime commercial minerals are ilmenite and rutile. The metal was isolated in pure form (1910) by the metallurgist Matthew A. Hunter by reducing titanium tetrachloride (TiCl4) with sodium in an airtight steel cylinder.

Pure titanium is ductile, about half as dense as iron and less than twice as dense as aluminum; it can be polished to a high lustre. The metal has a very low electrical and thermal conductivity and is paramagnetic (weakly attracted to a magnet). Two crystal structures exist: below 883 °C (1,621 °F), hexagonal close-packed (alpha); above 883 °C, body-centred cubic (beta). Natural titanium consists of five stable isotopes: titanium-46 (8.0 percent), titanium-47 (7.3 percent), titanium-48 (73.8 percent), titanium-49 (5.5 percent), and titanium-50 (5.4 percent).
Titanium is important as an alloying agent with most metals and some nonmetals. Some of these alloys have much higher tensile strengths than does titanium itself. Titanium has excellent corrosion-resistance in many environments because of the formation of a passive oxide surface film.

ROUND BAR

Flanges

Sheets

FASTNER

Specification :-

  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B265 / ASME SB265, AMS 4902
  • Dimension : ASTM, ASME, and API
  • Size Range : 0.012″ – 0.125″
  • Tempers : Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard
  • Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
  • Form : Plain Sheet, Shim Sheet, Perforated Sheet
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B381 / ASME SB381
  • Dimension : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
  • Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
  • Size : 1/2″ (15 NB) to 48″ (1200NB)
  • Class/ Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
  • Flange Face Types : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
  • Form : Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Plate flange, ASME B16.5 flange
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B348 / ASTM SB348
  • Size Range : Width: 3.17mm to 350mm dia
  • Length(mm) : 2 meters – 7 meters ( 8 feet to 24 feet)
  • Thickness : 2mm~100mm
  • Width: 25-100
  • Types : Titanium Flat Bars, Titanium Alloy Flat Bars
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B363 / ASME SB363
  • Dimension : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
  • Size : 1/2″ to 24″ NB to 24″NB in
  • Types : Seamless / Welded / Fabricated
  • Schedule : Sch 5 TO Sch XXS.
  • Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
  • Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B861, B862 / ASME SB861, SB862
  • Pipe Size : 15″NB – 150″NB
  • Outside Diameter : 1.250″ – 6.000″ (30-150mm)
  • Wall Range : 0.095″ – 1.000″ (.2.5-25mm)
  • Length : Single Random, Double Random & Required Length
  • Thickness : 0.3mm – 50 mm
  • Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH120, SCH140, SCH160, XXS
  • Types : Seamless, Welded, ERW
  • End : Plain End, Beveled End, Treaded
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B348 / ASME B348
  • Size Range : 40mm*20mm~300mm*300mm
  • Thickness : 3.0mm – 120mm
  • Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
  • Types : Structural Steel U, C, Miscellaneous Channels, Hot Rolled Channel
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B348 / ASME B348
  • Size Range : (Ro)Dia 4 – 600mm, (Hex) 6-75mm, (SQ) 4 -100mm
  • Thickness : 5 mm To 500 mm thick in 100 mm TO 6000 mm.
  • Types : Round, Square, Recatangle, Hexagonal, Round Threaded
  • Grades : Titanium Gr.1, Titanium Gr.2, Titanium Gr.4, Titanium Gr.5, Titanium Gr.7
  • Standard : ASTM B348 / ASME B348
  • Size Range : 3″thru 12.31″
  • Thickness : 3.0mm – 120mm
  • Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
  • Types : Structural Steel U, C, Miscellaneous T Beams, Hot Rolled T Beams
  • Specification : ASTM B348/ ASME SB348
  • Standard : DIN, ASTM, BS and all International Standards
  • Bolt / Screw Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
  • Nut Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
  • Washer Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
  • Length : 3 mm to 200 mm
  • Types : Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw, Hex Set Screw, Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw, Nut.
error: Content is protected !!